Wi-Fi Protected Setup™ (WPS) is a feature that lets you easily connect WPS-supported client devices to your router wirelessly. This article will give you instructions on how to use the WPS button on your Belkin wireless router. WPS, or Wi-Fi Protected Setup, is a feature built into many modems and routers, including those manufactured by Belkin.
It is designed to simplify the process of connecting to a wireless network from a computer or other device, providing a user-friendly front-end to encryption technologies such as WEP, or Wired Equivalent Privacy, and WPA, or Wi-Fi Protected Access, which prevent unauthorized devices from using a wireless network.
Which version you choose depends on personal preference and the wpw options on your particular Belkin model and other hardware in use. WPS provides a more straightforward solution for those less familiar with setting up networks -- without it in place, what to pack for a camping trip list longer and more complicated key code is required to gain access to the wireless network.
Enable or disable WPS -- it is enabled by default -- from the subsequent screen. The two options for enrolling belkn connecting a wireless device are accessible from the same screen.
Check the information supplied with your wireless device or adapter for recommendations routdr which method to use. To connect a device using the PIN method, locate the wireless adapter's PIN number -- this is typically printed on the adapter itself or in the accompanying documentation.
A confirmation message appears if the device has been connected successfully. You then have two minutes to press the "PBC" button on the wireless adapter or device, or activate the equivalent software utility, to make the connection. For more details of the technology and steps for troubleshooting connection issues, visit the official Belkin Support website. An information technology journalist sinceDavid Nield writes about the Web, technology, hardware and software. By David Nield.
Belkin Support: Drivers, Downloads, Troubleshooting. Related Articles.
Connecting devices using Wi-Fi Protected Setup™ (WPS) of the Belkin WiFi 6 Router Wi-Fi Protected Setup™ (WPS) is a computing standard by the Wi-Fi Alliance which is designed to allow easier setup and configuration of wireless home networks. Wi-Fi Protected Setup™ (WPS) is a system designed to allow users an easier way to protect their network and add new wireless devices. Depending on your Belkin router's model number, you may use the Push Button Configuration (PBC) method by pushing the WPS button on the router or by establishing a Personal Identification Number (PIN). Feb 26, · WPS stands for "Wi-Fi Protected Setup," It gives you an easier way to connect devices to your router. If you've connected a device to a router before, you've likely experienced the horrors of default router lovemedat.com: Simon Batt.
Belkin International, Inc. Software does not include any Open Source Software as defined below. As part of this license, you may A operate the Software in the manner described in the user documentation for the Software; B where the Software is provided for download onto a personal computer or mobile device, make as many copies of the Software as you reasonably need for your own use this does not include firmware ; and C permanently transfer all of your rights to use the Product including but not limited to the Software to another person, so long as that person also agrees to be bound by this Agreement, and following such transfer you stop using the Product and the Software.
The Software is licensed, not sold, to you. You only have the non-exclusive right to use the Software in accordance with this Agreement. All rights not expressly granted to you by Belkin under this Agreement are hereby reserved by Belkin.
While Belkin is not required to do so, Belkin may provide you with upgrades or updates to this Software. If you decide not to download and use an upgrade or update provided by Belkin, you understand that you could put the Software at risk to serious security threats or cause the Software to become unusable or unstable.
Some Products include an auto-update feature, which gives us the ability to make updates automatically. You can change auto-update options by changing your settings within the Product account information. In very limited cases, updates may still be automatically applied, regardless of the auto-update setting.
For example, we may provide an automatic update that fixes a security breach or vulnerability to your network. We may also provide you with updated Software data files automatically to benefit you, such as to provide you with updated device information to identify new devices in your network.
Nothing in this Agreement limits your rights under, or grants you rights that supersede, any Open Source Software license. You acknowledge that the Open Source Software license is solely between you and the applicable licensor of the Open Source Software.
You shall comply with the terms of all applicable Open Source Software licenses, if any. Belkin is not obligated to provide any maintenance or support for the Open Source Software or any Product Software that has been modified by you pursuant to an Open Source Software license. Open source licenses are generally licenses that make source code available for free modification and distribution, but can also apply to technology received and distributed solely in object code form.
All title and intellectual property rights including without limitation all copyrights, patents, trade secret rights and trademark rights in and to the Software including but not limited to any content incorporated into the Software , the accompanying printed materials, and any copies of the Software, are owned by Belkin or its suppliers.
Therefore, you must treat the Software like any other material protected by laws and treaties relating to international property rights and in accordance with this Agreement. These features are provided solely as a convenience to you. You will need to make your own independent judgment regarding your interaction with these Linked Sites.
Once accepted, this Agreement remains in effect until terminated. The limited license in this Agreement will be automatically terminated if you fail to comply with any of the terms and conditions in this Agreement. You agree that upon such termination, you will immediately destroy all programs and documentation that relate to the Software, including all copies made or obtained by you, and otherwise cease use of the Software.
If the Software has been installed on a personal computer or mobile device, you must uninstall the Software immediately. If the Software is software or firmware embedded on a Product, you must stop using the Product. All provisions of this Agreement except for Section 1 and the limited warranty in Section 12 the first paragraph will survive termination. In addition to these remedies a "consumer" within the meaning of the CGA may claim for any reasonably foreseeable loss other than loss or damage through reduction of value of the goods that results from the initial problem.
To make a claim under this Limited Warranty, return the defective media along with the sales receipt directly to Belkin at the following address: Belkin International, Inc. This Limited Warranty is void if failure of the media has resulted from accident, abuse, or misapplication. Any replacement media will be warranted for the remainder of the original Warranty Period or thirty 30 days, whichever is longer.
In relation to consumers who are entitled to the benefit of the CGA, the media on which Software is provided comes with guarantees that cannot be excluded under New Zealand law, and this Limited Warranty is in addition to any statutory rights such consumers may have under New Zealand law.
This Limited Warranty does not apply in Australia. Consumers in Australia have statutory rights in relation to the Software and media on which the Software is provided under the Australian Consumer Law. To the extent warranties cannot be disclaimed or excluded, they are limited to the duration of the relevant Warranty Period. It is your responsibility to back up your system, including without limitation, any material, information or data that you may use or possess in connection with the Product or Software, and Belkin shall have no liability for your failure to back up your system or any material, information or data.
Some Belkin Products and Software may monitor energy consumption in the home. Belkin does not guarantee or promise any specific level of energy savings or other monetary benefit from the use of the Products or Software or any other feature.
From time to time, Belkin may use the Software to provide you with information that is unique to you and your energy usage and suggests an opportunity to save money on energy bills if you adopt suggestions or features of the Product or Software.
You acknowledge that this information is not a guarantee of actual savings, and you agree not to seek monetary or other remedies from Belkin if your savings differs. We cannot guarantee that it is correct or up to date. In cases where it is critical, accessing information through the Software is not a substitute for direct access of the information in the home.
The warranties and remedies set out in this Agreement are exclusive, and, to the extent permitted by law, in lieu of all others oral or written, express or implied. You agree to strictly comply with all export control laws and regulations and agree not to export, re-export, divert, transfer or disclose any portion of the Software or any related technical information or materials, directly or indirectly, in violation of any applicable export law or regulation.
All U. Government users acquire the Software and user documentation with only those rights herein that apply to non-governmental customers. Use of either the Software or user documentation or both constitutes agreement by the U.
If any portion of this Agreement or any of its terms is found to be void or unenforceable by law in a particular jurisdiction, such portion or terms shall be interpreted and enforced to the maximum extent allowed in such jurisdiction, and the remaining provisions or any part thereof will remain in full force and effect. This Agreement constitutes the entire agreement between Belkin and you with respect to the Software and your use thereof and supersedes any conflicting or additional terms contained in any purchase order or elsewhere.
However, in the event of a conflict or inconsistency between the English and any non-English versions, the English version of this Agreement shall govern, to the extent not prohibited by local law in your jurisdiction. Any suppliers of Belkin shall be direct and intended third-party beneficiaries of this Agreement, including without limitation with respect to the disclaimers of warranties and limitations on liability set forth herein.
Other than as set forth in the preceding sentence, a person or entity who is not a party to this Agreement shall not have any right to enforce any term of this Agreement. No failure or delay in exercising any right or remedy shall operate as a waiver of any such or any other right or remedy.
The language of this Agreement shall not be construed strictly for or against either party, regardless of who drafted such language or was principally responsible for drafting it. The rights and obligations under this Agreement are not assignable by you, and any attempted assignment shall be void and without effect.
This Agreement shall bind and inure to the benefit of the parties and their successors and permitted assigns. If you are located outside of the United States, or if Section 17 does not apply to you or is otherwise unenforceable as adjudicated by a court of competent jurisdiction, then Section 18 applies to you:.
Any action arising out of or relating to this Agreement may be brought exclusively in the appropriate state or federal court in Los Angeles, California, and Belkin and you irrevocably consent to the jurisdiction of such courts and venue in Los Angeles, California. However, if you are a consumer and you live in a country where Belkin markets or distributes the Software, local law may require that certain consumer protection laws of your country of residence apply to some sections of this Agreement.
In addition, Belkin may seek injunctive relief in any court having jurisdiction to protect its intellectual property rights. Third-party trademarks mentioned are the property of their respective owners. See more languages. Share the Article:. In setting up the WPS, you can either use the physical button that your device has, or you can log in to the web-based setup page and select one of the three options for configuring WPS.
Connecting a device using the WPS button. Step 1: Locate and press the WPS button on your router. Your device should now be connected to your router wirelessly using WPS. Connecting a device using its Device PIN. For instructions, click here. Step 2: Click on Configuration. After the configuration process, your device should now be connected to your router wirelessly using WPS. After entering the PIN, follow the onscreen instructions for your client device. Was this support article useful?
YES NO. Thank you for your feedback. Feedback Please tell us how we can make this article useful. If you are located in the United States, Section 17 applies to you: If you are located outside of the United States, or if Section 17 does not apply to you or is otherwise unenforceable as adjudicated by a court of competent jurisdiction, then Section 18 applies to you: All rights reserved.